Poll
Which kind of inspection do you perform?
Destructive
39%
Non-destructive
27%
Both
34%
Total votes: 59
There are 51 users online
The Perfect Companion to SQC Online
Practical Acceptance Sampling (2nd Edition) is a hands-on introduction to the inspection of products and services for quality assurance using statistically-based sampling plans.
Try it free
Download first chapter (PDF)
Methods are illustrated using SQC Online, Microsoft Excel, and online calculators.
Download first chapter (PDF)
From the Glossary
The zones in an ordinary 3-sigma control chart are beyond the upper control limit (3,∞), and below the lower control limit (-∞, -3).
- To specify the alarm zone as the area between the warning limits and control limits, enter a=2, b=3.
- In a control chart with 0.001 probability control limits (3.09 "sigma") and 0.025 warning limits (2.24 "sigma"), the rule "two consecutive points between the control and warning limits" is given by: k=2, a=2.24, b=3.09.
- The zones are usually symmetric around the center line. For example: [-3,-2] and [2,3].